CROSS Safety Report
Stud framing with self-tapping screws
This report is over 2 years old
Overview
A reporter raises concerns about contractors not using the specified screws for constructing metal stud frame walls.
Key Learning Outcomes
For construction professional:
-
Any proposed changes to the type of fixings to be used on site should be first approved by the design engineer
Full Report
Find out more about the Full Report
Our secure and confidential safety reporting system gives professionals the opportunity to share their experiences to help others. If you would like to know more, please visit the reporting to CROSS-AUS page.
Another report was of proprietary metal stud framing fastened with self-tapping screws where the erectors used a different size of screw from that specified. This was spotted by the designer’s engineer.
Submit a report
Your report will make a difference. It will help to create positive change and improve safety.
Our secure and confidential safety reporting system gives professionals the opportunity to share their experiences to help others.
Feedback
No feedback has yet been published for this page.
Expert Panel Comments
An Expert Panel comment on the reports we receive. They use their experience to help you understand what can be learned from the reports. If you would like to know more, please visit the CROSS-AUS Expert Panel page.
CROSS has previously received reports on problems with stainless steel in structural situations and further comments will be welcome.