Structural Safety Information and Reports

Filter your results

212 results

Collapse of unusual hybrid concrete and steel strand truss on school roof

This report concerns the collapse of a school hall roof which resulted from the failure of one of a number of unusual hybrid concrete and steel strand trusses. The trusses consist of a precast reinforced concrete top chord and verticals with a bottom chord of tensioned steel strands. The failure of the truss resulted in the collapse of the supported flat roof local to the failed truss, and da...

Incompetent design of simple steel beams

This report concerns designs for simple steel beams submitted to building control bodies under Part A of the Building Regulations. The reporter, a checking engineer for a building control body, was not able to accept the effective length and restraints assumed in a number of submitted designs. Most originated from individuals who used proprietary structural design computer packages without, i...

Concerns over corrosion of dissimilar metals in fixing cavity wall tie systems

A reporter is concerned about corrosion that may occur between dissimilar metals that can be used in cavity wall tie systems. The reporter has noted that stainless steel and carbon steel may be fixed together in wall cavities, which are damp environments, and that corrosion of dissimilar metals in contact may occur.

Overall stability of building proposed to be provided by metal framing and plasterboard

Metal framing and plasterboard was used to provide lateral stability to a building. The form of construction was later deemed to be unsuitable and extensive remedial works had to be carried out.

Incorrectly installed tension control bolts could have led to serious consequences

A reporter finds incorrectly installed tension control bolts during a site inspection of a new highway bridge over a railway. The incorrectly fitted bolts could have had major structural implications, and led to other safety risks, if the installation error had not been spotted.

Partial collapse of a shopping mall roof under drifting snow

Partial collapse of a shopping mall roof under drifting snow caused by lack of building code provisions for drifting snow and poor fabrication of open web steel joists.

Incorrect fabrication of balustrade connection

A reporter describes how threaded bars were incorrectly used for a balustrade fixing instead of bolts which led to failure of the connection.

Inadequate design and procurement of large steel roof structure

This report demonstrates the importance of following the correct process for project procurement, including preparing a detailed design and project specification, and certificating compliance with the relevant building codes. It also covers the potential consequences when shortcuts are taken.

Wrong length blind bolts lead to unsafe bridge structure

Bridge strengthening being carried out using blind bolts left a structure in an unsafe condition with traffic loading on it.

Cantilever bridge parapet falsework failure

A reporter has experienced the failure of cantilever parapet falsework twice, for different reasons, using two different products during bridge construction.

Submit a report

Your report will make a difference. It will help to create positive change and improve safety.

Our secure and confidential safety reporting system gives professionals the opportunity to share their experiences to help others.

Find out more

Safety information search results

Filter your results

Safety area

Building or structure type

Materials

Project or lifecycle stage

Design

Project type

Elements & systems

Content type

CROSS regions

Collapse of unusual hybrid concrete and steel strand truss on school roof

Incompetent design of simple steel beams

Concerns over corrosion of dissimilar metals in fixing cavity wall tie systems

Overall stability of building proposed to be provided by metal framing and plasterboard

Incorrectly installed tension control bolts could have led to serious consequences

Partial collapse of a shopping mall roof under drifting snow

Incorrect fabrication of balustrade connection

Inadequate design and procurement of large steel roof structure

Wrong length blind bolts lead to unsafe bridge structure

Cantilever bridge parapet falsework failure

Submit a report

Safety information search results

Filter your results

Safety area

Building or structure type

Building height

Materials

Products

Project or lifecycle stage

Design

Construction

Operation or occupation

Codes, standards & regulations

Fire incident response

Project type

Construction period

Method of construction

Structural form

Elements & systems

Temporary works

Plant & equipment

Weather & natural hazards

Utilities

Safety reporting

Organisations

Project delivery methods

Business practice

Risk management

Public incidents

Theme pages

Locations

Content type

CROSS regions

Submit a report