Skip to main content

CROSS Safety Report

Snow loading in Scotland - collapsed warehouses

Report ID: 193 Published: 1 July 2011 Region: CROSS-UK

This report is over 2 years old

Please be aware that it might contain information that is no longer up to date. We keep all reports available for historic reference and as learning aids.

Overview

A reporter provided a list of 40 whisky warehouse buildings that had collapsed in the recent heavy snow conditions in northern Scotland (January/February 2010).

Key Learning Outcomes

For civil and structural design engineers:

  • The fact that there are so many records of increased snow loading is a reminder that all loadings are statistical projections and there is always a chance that they will be exceeded

  • Careful consideration should be given to the risk of snow loads especially for areas prone to heavier snow falls

  • Consider what reasonably foreseeable loads could be applied beyond the code minimum values

For all built environment professionals:

Full Report

Find out more about the Full Report

Our secure and confidential safety reporting system gives professionals the opportunity to share their experiences to help others. If you would like to know more, please visit the reporting to CROSS-UK page.

A reporter provided a list of 40 whisky warehouse buildings that had collapsed in the recent heavy snow conditions in northern Scotland (January/February 2010). Damage caused to the roofs is shown in Figure 1.

Type

Age (years) Construction Roof Shape Plan Area

 2 warehouses

35+

steel frame supporting lattice truss roof.

low pitch roof

2,000 sq m

 36 warehouses

20-40

steel frame supporting lattice truss roof.

low pitch roof

2,000 and 2,500 sq m

1 warehouse

35+

concrete block walls with slated roof on timber trusses

low pitch roof

2,500 sq m

2 warehouses

50

masonry walls with asbestos cement sheeted roof on timber trusses

pitched

1,800 sq m

Image
Figure 1: roof collapse in warehouse

Similar issues are raised in report 264 and also reports 183, 193, 195, & 248. You can search for safety information on snow loads and failures on the CROSS website.

Expert Panel Comments

Find out more about the Expert Panels

Expert Panels comment on the reports we receive. They use their experience to help you understand what can be learned from the reports. If you would like to know more, please visit the CROSS-UK Expert Panels page.

These are general comments on all of the above reports

The fact that there are so many records of increased snow loading is a reminder that all loadings are statistical projections and there is always a chance that they will be exceeded. Designers should be generally alert that safety is not prejudiced by any single assumption (in strength or loading). They should avoid situations where, should the assumption be in error, the result will be a significant safety hazard.

This might be the case if structures are very light weight and the only dominant loading is snow. Where there are significant amounts of dead and live loading, it is unlikely that both will be in error at the same time. Safety should not be sensitive to any one assumption. The example of the farmer burning straw to melt snow reflects the practice at some sporting events where there are marquees of having space heaters available to prevent snow from lying on the roofs.

Agricultural buildings

Agricultural type buildings may be designed with lower safety levels for economy and because safety to humans is not likely to be prejudiced. Designers (and their clients) should also consider carefully the commercial consequences of failure. It might be worth accepting a higher risk of failure if the structure is just protecting stored fodder, but if the protected contents are valuable livestock, it might be thought prudent to look for a more robust structure. The marginal cost increase of a safer more robust design may well be a sensible investment. It is not known however what design loads were used in any of the reported cases. 

Designers (and their clients) should also consider carefully the commercial consequences of failure.

Adapting to changes

The industry should also beware of changing practice and inadvertently rendering inherent assumptions invalid. Thus, the demand in many structures for increased roof insulation renders it less likely that snow will quickly melt or slide. A number of portal frames in these reports failed under direct overload which might be tolerable in terms of safety if the form of failure were a standard plastic collapse mechanism (i.e. excessive displacement short of unstable failure), but from the pictures this appears not to be so.

An investigation of forms of failure might show less risk of catastrophic damage simply by boosting connection capacity or paying greater attention to avoiding failure by instability: benefits that might be achieved at minimum cost. These examples and other evidence has been collated by the Scottish Government and used to issue guidance to the agricultural community and designers, and a report has been sent to BSI so that the data, along with other information, can be considered with reference to Eurocodes and their UK National Annexes.

Recent SCOSS alerts

Alerts were also issued by the Standing Committee on Structural Safety (SCOSS) in 2010 and 2011. The situation emphasises that design is a risk management process; it needs thought, and some argument perhaps, to decide if the relaxations currently permitted for agricultural buildings are as acceptable as once thought, when weighed against the cost of failure – albeit mostly economic in these cases.

For other buildings, it may also be that designing for increased snow loads and making additional effort to avoid build-up/drifting opportunity may be a worthwhile investment when set against business disruption should they present a high risk of failure.

Industry guidance

However, many of the collapses were probably of buildings which were designed to superseded Codes and it is possible that some buildings may not have been built as designed and that there were cases of construction defects and of maintenance issues.

Designers and constructors of new buildings, particularly agricultural buildings, in areas potentially subject to heavy snow falls, should refer to:

The winters of 2009/2010 and 2010/2011 were very severe in other countries and in the USA, for example, there were numerous reports of failure due to snow loads and it will be interesting to find out whether these are being regarded as abnormal. Of course, snow falls may be related to climate change, but the science, and work to support it, is not sufficiently advanced to provide an answer.

Share your knowledge

Your report will make a difference. It will help to create positive change and improve safety.

Our secure and confidential safety reporting system gives professionals the opportunity to share their experiences to help others.