CROSS Safety Report
PV panels and structural adequacy of roofs
This report is over 2 years old
A reporter raises concerns over the structural adequacy of existing roofs to accommodate PV panels.
Key Learning Outcomes
For PV panel suppliers and building owners:
A structural assessment should be carried out on existing roofs to ensure they can accommodate the additional loading from PV panels
Assessments should be carried by a person who has the relevant experience and is competent to do so
Find out more about the Full Report
Our secure and confidential safety reporting system gives professionals the opportunity to share their experiences to help others. If you would like to know more, please visit the reporting to CROSS-US page.
In total over a period of a few years a reporter's firm of consulting engineers assessed approximately 25,000 domestic roofs to check their adequacy for supporting PV panels. These were carried out on the basis of existing roof information provided by the installer.
Of those investigated, between 15 and 20% were found to be structurally inadequate. In some of these instances they recommended strengthening works such as propping purlins, doubling up on rafters and other measures.
Expert Panel Comments
Find out more about the Expert Panel
An Expert Panel comment on the reports we receive. They use their experience to help you understand what can be learned from the reports. If you would like to know more, please visit the CROSS-US Expert Panel page.
There are no Expert Panel comments on this report. The Expert Panels are only asked to comment on selected reports. These are normally reports where there is an opportunity for them to help you understand what can be learned from the report.
Share your knowledge
Your report will make a difference. It will help to create positive change and improve safety.
Our secure and confidential safety reporting system gives professionals the opportunity to share their experiences to help others.
No feedback has yet been published for this page.